support
back
DIMMER MODULE / 250W LED / RETRACTIVE
A dimmer module for use with Buster + Punch dimmer switches, wall plates and detail kits.
Push ON/OFF rotary dimmer with multi-location dimming via our retractive toggle switches.
Only compatible with retractive switches. Not compatible with 2-Way / Intermediate switches.
Input: 240VAC ~ 50Hz
Dimming Type: Auto Detect Trailing / Leading Edge dimming, with manual setting of LE/TE modes.
3-250W: When used with dimmable LED lamps and electronic transformers.
10-350W: When used with Incandescent lamps, MV Halogen lamps and LV Incandescent Ballasts/Electronic Transformers.
Operating Temperature: 0-55 C Humidity: 10-90% (relative humidity).
Not compatible with non-dimmable fluorescent bulbs, tubes and electric motors.
When paired with our retractive toggle switches, the full functionality of the dimmer is possible from up to 10 locations:
A short press turns the lights on/off. A long press cycles the brightness up/down to reach the desired brightness level.</p
- A retractive toggle switch has a sprung mechanism that returns to its original position, also known as a ‘push to make’, ‘push button’ or ‘finish’ switch. 250 VAC /10 A
Our retractive toggle switch can be paired with industry-standard smart control modules (with retractive switch inputs) to control various functions such as lighting, blinds, gates etc within your home. For example, when used in a lighting circuit, a short press turns the light on/off. A long press cycles the brightness up and then down to reach the desired brightness level. Wired on the same circuit as a window blind, a short press opens/closes the blind completely, and a long press partially raises or lowers the blind until you release it.
