support
back
KITCHEN TAP / PULL-OUT MIXER / LINEAR / BRASS
A single lever kitchen tap with pull-out mixer that mixes water from the hot and cold pipes in your kitchen. This tap has been cast, sand-blasted and machined from solid metal in Italy. It features our signature linear-knurl pattern and is refined by hand. Available in four metal finishes: steel, brass, gun metal and welders black.
▪ Maximum thickness of mounting surface 70mm, with supplied fixings.
▪ Minimum recommended water pressure: 10.2 PSI (0.7 BAR)
▪ Maximum recommended water pressure: 72 PSI (5 BAR)
▪ Recommended maximum hot water temperature: 70°C (158°F)
▪ Recommended temperature range: 5 – 60°C (41 – 140°F)
Note: exceeding these temperatures or water pressures can result in damage to the tap. A pressure reducing valve may be required to be fitted in high water pressure situations.
All Buster + Punch mixer taps conform to standard EN817. In some cases, local housing regulations may require mixer taps to be of a higher minimum water pressure standard. In this instance we would recommend consulting with a certified plumber about installing a pressure regular or similar device.
Only available for sale in:
Austria, Belgium, Denmark, France, Germany, Italy, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Arab Emirates
All Buster + Punch mixer taps conform to standard EN817. In some cases, local housing regulations may require mixer taps to be of a higher minimum water pressure standard. In this instance we would recommend consulting with a certified plumber about installing a pressure regulator or similar device.
Mixer taps are tested to work with a max. pressure of 10 bar (1000 kPa) and recommended working pressure range is 0.7 – 5.0 bar (70 kPa – 500 kPa).
