Technical Spec

• PRODUCT DESCRIPTION

  KITCHEN TAP / PULL-OUT MIXER / LINEAR / GUN METAL

  A single lever kitchen tap with pull-out mixer that mixes water from the hot and cold pipes in your kitchen. This tap has been cast, sand-blasted and machined from solid metal in Italy. It features our signature linear-knurl pattern and is refined by hand. Available in four metal finishes: steel, brass, gun metal and welders black.

  ▪ Maximum thickness of mounting surface 70mm, with supplied fixings.

  ▪ Minimum recommended water pressure: 10.2 PSI (0.7 BAR)

  ▪ Maximum recommended water pressure: 72 PSI (5 BAR)

  ▪ Recommended maximum hot water temperature: 70°C (158°F)

  ▪ Recommended temperature range: 5 – 60°C (41 – 140°F)

  Note: exceeding these temperatures or water pressures can result in damage to the tap. A pressure reducing valve may be required to be fitted in high water pressure situations.

  Only available for sale in the UK

  All Buster + Punch mixer taps conform to standard EN817. In some cases, local housing regulations may require mixer taps to be of a higher minimum water pressure standard. In this instance we would recommend consulting with a certified plumber about installing a pressure regulator or similar device.

  Mixer taps are tested to work with a max. pressure of 10 bar (1000 kPa) and recommended working pressure range is 0.7 – 5.0 bar (70 kPa – 500 kPa).

  

  • Full Technical Specification
• WHICH FINISH?
  • 

    WELDERS BLACK

    

    Welders Black is made from solid stainless steel with a unique black PVD coating technique making it highly durable. The result is a rich, deep off-black finish, reminiscent of the soft charcoals of an industrial furnace. Welders black is the epitome of beauty meets beast.

  •  

    STEEL

    

    Steel is made from solid stainless steel and refined by hand. This is our most durable finish and will remain the same crisp finish from the moment you take it out of the box for many years to come.

  •  

    BRASS

    

    Brass is made from solid brass which has been precision machined and then finished with two layers of durable satin lacquer. This finish will age slowly with time, moving from a radiant brass colour to a deeper more golden finish within a few years.

  •  

    GUN METAL

    

    Gun metal is made from solid stainless steel which is then finished in gun metal PVD. This is an extremely durable finish and will remain the same elegant finish from the moment you take it out of the box for many years to come. It is also a very easy to clean finish.

  •  

    BLACK

    

    Black is made from aluminium and then anodised to give a very consistent deep black finish.

• WHICH BULBS?

• INCLUDED IN THE BOX

  

• SCALE
• INSTALLATION VIDEO